1-10V Dimming LED Slim Batten 4ft/120cm 17w
LED batten lights are complete LED solutions designed to replace 2ft to 6ft T6 and T8 batten fittings in a broad variety of applications. LED battens can be connected through the end or rear knock-outs in the end and rear of the unit.This allows for end-to-end continous installation.This special design makes the batten widely used in factories,supermarket,public transport stations and so on.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
| Slim aluminum case thinner than normal batten|
The popping clip make the top head out for installation
Higher Lumen output than the fluorescent batten
| Smart popping clip for installation|
Similar normal fluorescent batten with higher Lumen
Easy installation on top head cover
| Replace fluorescent batten|
Industrial Lighting: Factory, Warehouse, etc
Commercial Lighting: Office, Supermarket, etc.
Public Lighting: Residence, Hospitals, School, MTR station, Train station, Airport, etc
Case finish: White or silver
Lighting Cover: Clear or Frosted
Warm white: WW/3000K
Neutral white: NW/4000K
Pure white: PW/5000K
Cool white: CW/6000K
Input Voltage: AC90-277V 50/60Hz
Operation Voltage: DC36-42V
Total harmonic distortion: THD<10%
Power Factor: PF>0.95
Color Index: Ra>80
Lumen maintenance @6000h: >80%
Switching cycle before failure: 100,000
IP Rating: IP20
Life Span: 50,000 hours
Warranty: 5 years
Operation Temperature: -15°C~+50°C
Storage Temperature: -25°C~+55°C
1.Do you know “dali “?
Digital addressable lighting interface (DALI) is a trademark for network-based systems that control lighting in building automation.
2.What’s the fire rating categories ?
VO-Burning stops within 10 seconds on vertical specimen; drips of particles allowed as long as they are not inflamed.
HB-Slow burning on a horizonal specimen’s burning rate <76mm /min thickness <3mm or burning stops before 100mm.
TP(b)-Slow burning rate <50mm / min for thickness <3mm.
TP(a)-Self extinguishes and flaming and afterglow should not exceed 5 seconds once source the source of flame is removed.
3.How to explain “Flux/luminous Flux “?
Luminous flux is the measure of the perceived power of light produced by the LED, adjusting to reflect the varying sensitivity of the human eye to different wavelengths of light.
|Color Temperature||CCT(K)||WW:3000K NW:4000K PW: 5000K CW:6000K|
|AC Input Voltage||V||AC100-277V|
|Switching Cycle before Failure||Times||100000|
|Life Span||Hours||50000 hours|